Built to plan
Framed from your architectural and engineered drawings, to the plan and the Ontario Building Code, not by rule of thumb.
Laneway and coach house framing in Brampton and across the GTA, built to your drawings and the Ontario Building Code. Timberr Framing is licensed, insured and WSIB-covered, rated 5.0 on Google, with a workmanship warranty behind every job.
Send the drawings, or just the address and what you are building. We will tell you what is missing before we price it.
Framed from your architectural and engineered drawings, to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a free, no-obligation site visit and estimate with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Send the drawings, or just the address and what you are building. We will tell you what is missing and what happens next.
Timberr Framing did an excellent job with our commercial units! We'll definitely be using them again for future projects!
We have worked with Timberr Framing on a few projects, and they continue to impress with their great workmanship and reliable service in our commercial unit. We highly recommend them for all your metal stud framing needs!
Highly recommend to anyone with a stacked townhome project! Outstanding craftsmanship once again Timberr Framing.
I was impressed by Timberr Framing’s skilled craftsmanship during our commercial framing project. They delivered high-quality work and maintained strong structural integrity in our commercial development that required metal framing.
Timberr Framing’s team was not only punctual and dependable but also demonstrated exceptional skills in both addition and commercial framing projects. We'll definitely hire them again!
Timberr Framing has an efficient process and always completes work on time. Their team is highly organized, and our team of developers are always satisfied with the final results.
Brampton requires permits for house additions and structural alterations. The addition package distinguishes existing work from proposed work and includes structural information appropriate to the scope. Road-occupancy and mobile-crane approvals are separate from the building permit when City road space is affected.
Brampton warns that permit work completed without approval may need to be uncovered, so the laneway-house frame stays visible for assigned inspection. Qualifying additions and replacement houses in mapped mature-neighbourhood areas can require a separate review. Building approval for an additional unit does not replace the separate rental-licensing requirement where that program applies.
At the address, we verify footprint controls, openings, height and roof geometry. We also confirm how lumber, engineered members and narrow-site deliveries will reach and move through the work area. The quote separates footprint, storeys, openings, roof form, engineered members and access. Any unresolved drawing, access or inspection condition is named instead of being priced as if it were settled.
A Toronto laneway suite is defined by its relationship to a laneway, while a Markham coach house specifically places most of the dwelling above a detached garage. That means your engineer may need to settle the load path before material is ordered.
A detached additional residential unit without lane access can be described municipally as a garden suite, garden home, accessory-building unit or another local term. That means your quote carries the matching member layout, connector schedule and site handling.
A garage below living space adds large vehicle openings, floor loading and separation conditions not present in a one-storey detached suite. That means you get the route supported by the drawings instead of a choice made from habit.
Toronto requires principal access and firefighter access under the cited OBC provisions for laneway suites, which means your following trades inherit that system's spacing, openings and limits.
Failure: using laneway suite and coach house as interchangeable permit terms. Prevention: follow the municipality's definition and approved form, which means you do not inherit that condition after it is concealed. Failure: finalizing wall openings before limiting-distance review. Prevention: use the approved exposing-building-face elevations, which means you can correct the load path or assembly while the work remains accessible.
Failure: treating a room over a garage as an ordinary floor bay. Prevention: coordinate vehicle openings, beams, separation and service routes, which means your approved repair is documented before the next trade arrives. We stop a conflict involving a toronto laneway suite because you need the designer's answer before an improvised fix becomes permanent.
Part 9 loadbearing studs use the listed grades and framing lumber is installed at no more than 19 percent moisture content. That means your installed member must match the grade or product shown in the design. Floor joists require at least 38 mm end bearing unless the permitted ribbon-board support is used, which means you can verify the material condition before it is enclosed.
Beam ends generally require at least 89 mm of even, level bearing, which means your bearing and connection detail must preserve that capacity. Joists framed into a wood beam require compliant hangers, another accepted connector or a permitted ledger, which means you can trace the fastening requirement to the actual assembly.
Toronto requires scaled, dimensioned, signed and dated drawings for a new laneway-suite permit, which means your sequence must reach that visible hold point before finishes. Markham requires a housing permit for a coach house, which means you can plan the following trade around the stated response.
Ontario places responsibility on the permit holder to request inspections at stages including structural framing. That means your mechanical and electrical work may have to be complete before the framing review. Garage-door, stair, window and cladding trades inherit the framed openings and clearances, which means you avoid reopening work the municipality needed to see.
Address, municipality, local unit definition, zoning result and permit status, which means you give the estimator the current design basis. Survey and site plan showing the main house, lane, yards, trees, grade and access route, which means your takeoff can include the scheduled members and openings. Add the address, permit status and target start window, so you can separate what is ready to price from what still needs a decision.
Ours names what we frame, what another trade supplies, and what has to be settled before we mobilise. Compare the scope, not two totals built on different assumptions.
Clean framing, tight sequencing, and a tidy site, coordinated with concrete, drainage, openings, and surrounding trades, and completed to code where site work is in scope.
It depends on whether the scope is permit work. House additions and structural alterations require a Brampton building permit. The issued scope must match the work on site.
The issued permit package and the work for that inspection stage must be ready. Follow the inspection stages on the permit. Permit-required work may have to be uncovered if it is concealed early.
Only when the applicable municipal approval allows it. A road-occupancy or mobile-crane approval is required when the operation affects City road space.
Send the address, current architectural and structural drawings, permit status and clear site photos. For this scope, the quote also needs footprint, storeys, openings, roof form, engineered members and access plus the proposed route for lumber, engineered members and narrow-site deliveries.
Most are not, and that is fine. Send what you have and we will tell you what is missing before it costs you a week on site.
Framing services across Brampton. See all framing in Brampton →
Custom homes, additions, renovations, and multiplexes, framed on site for builders, homeowners, contractors, and property teams.
Send the current drawings, property address, permit status and target start. We will check the package around a toronto laneway suite, so you can resolve a missing structural, access or coordination decision before it becomes a site delay.
Backed by our workmanship warranty, we stand behind every job · Licensed, Insured & WSIB-Covered
Send the drawings, or just the address and what you are building. We will tell you what is missing before we price it.
Timberr Framing provides laneway and coach house framing, built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing supports plan-based framing for commercial, institutional, property, and builder-led projects across Toronto and Ontario.