Opening Geometry Control
Stair openings need the right length, width, trimmers, headers, and floor-edge support. Timberr frames the rough opening so finished stairs can meet the design without cutting back the floor later.
Stair Framing in Oshawa cuts and builds the structural stairs, stringers, treads, and landings, to rise, run, and code for safe, solid stairs. Timberr Framing builds it to plan and to the Ontario Building Code in Oshawa, licensed, insured, and WSIB-covered across the GTA and the Golden Horseshoe.
Tell us what you need and we’ll get you a quote. 5.0 on Google · Licensed, insured & WSIB-covered · Workmanship warranty · Free, no-obligation quote & site visit.
Timberr Framing did an excellent job with our commercial units! We'll definitely be using them again for future projects!
We have worked with Timberr Framing on a few projects, and they continue to impress with their great workmanship and reliable service in our commercial unit. We highly recommend them for all your metal stud framing needs!
Highly recommend to anyone with a stacked townhome project! Outstanding craftsmanship once again Timberr Framing.
I was impressed by Timberr Framing’s skilled craftsmanship during our commercial framing project. They delivered high-quality work and maintained strong structural integrity in our commercial development that required metal framing.
Timberr Framing’s team was not only punctual and dependable but also demonstrated exceptional skills in both addition and commercial framing projects. We'll definitely hire them again!
Timberr Framing has an efficient process and always completes work on time. Their team is highly organized, and our team of developers are always satisfied with the final results.
Stair openings need the right length, width, trimmers, headers, and floor-edge support. Timberr frames the rough opening so finished stairs can meet the design without cutting back the floor later.
Intermediate landings and stair turns concentrate loads into walls, posts, or beams. We frame landings and supports so they do not rely on weak partitions or finish materials for structure.
Stairs fail functionally when beams, ducts, or openings steal headroom. Timberr coordinates stair framing with floor systems and bulkheads before those conflicts become expensive field changes.
Guards, handrails, and newel posts need solid fastening points. We install backing and edge framing where railing hardware will land, not after drywall or finished treads are in place.
Stair framing creates the structural openings, landings, walls, stringer support, headers, guards, and backing required for interior or exterior stairs in homes, additions, suites, and commercial spaces. Timberr Framing coordinates with the engineer, architect, GC, stair supplier, and railing trades so stair geometry, bearing, headroom, and inspection details match the drawings and Ontario Building Code.
Stair framing is unforgiving geometry: rise, run, headroom, and landing bearing all have to agree with the Ontario Building Code and with each other. Timberr Framing lays out the stair opening from the drawings before framing around it, confirms landing bearing points, and checks headroom clearance at every tread before the rest of the floor closes in around the stairwell.
Quotes shift with stair type (straight run, switchback, winder), floor-to-floor height, and how much guard and rail backing the design calls for. Timberr frames the opening geometry first so trim, guards, and finish stairs aren't fighting an out-of-tolerance rough opening later, and coordinates directly with the GC on when the stairwell needs to be inspection-ready.
Timberr Framing coordinates stair framing timing with the GC so the opening is ready exactly when the stair supplier or finish carpenter needs it, avoiding a rough opening that sits unfinished and exposed for weeks.
We also confirm tread and riser dimensions against the architectural drawings before framing the opening, so the finished stair meets Ontario Building Code rise-and-run requirements.
Timberr frames stair framing throughout Oshawa, where Durham new-build growth, additions on older lots, and value-driven production framing. We frame to your architectural and engineered drawings and the Ontario Building Code, coordinating with your engineer, architect, and GC, and leave every structure plumb, square, and inspection-ready.
Every Oshawa job is staged so the trades behind us aren't waiting. Licensed, insured, and WSIB-covered, $5M liability.
Clean framing, tight sequencing, and a tidy site, coordinated with concrete, drainage, openings, and surrounding trades, and completed to code where site work is in scope.
The short version: Stair Framing cuts and builds the structural stairs, stringers, treads, and landings, to rise, run, and code for safe, solid stairs. For Oshawa projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes, we serve Oshawa and the surrounding area. Timing depends on project scope, plans, site access, and inspection scheduling.
Across Oshawa, the work concentrates around renovation and second-unit contractors and production builders, each job scoped to its own conditions.
Mostly downtown Oshawa, Windfields, Samac, and Lakeview, Timberr Framing frames for builders, general contractors, and homeowners across Oshawa.
In Oshawa, the work accounts for renovation and second-unit contractors and production builders, so scope of work is matched to the site.
Stringers and landings sized to load and code. For Oshawa, every build is sized to the actual conditions.
Timberr Framing serves Oshawa and the surrounding area, including renovation and second-unit contractors and production builders, with framing scheduled around plans, site access, and inspection timing.
All of Oshawa, renovation and second-unit contractors and production builders.
Yes, Timberr Framing serves downtown Oshawa, Windfields, Samac, and Lakeview across Oshawa, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope, Timberr Framing reviews the plans for each Oshawa project and provides a clear, documented quote.
Yes, Timberr Framing assesses Oshawa stair framing on site and provides a documented scope before any work begins.
A 5-star Google rating, local knowledge of Oshawa, renovation and second-unit contractors and production builders, licensed, insured, fully WSIB-covered work, and full documentation on every build.
Every build is backed: a workmanship warranty. Timberr Framing is licensed, insured, and fully WSIB-covered across Oshawa.
SPF and engineered stringers, with LVL where spans require, cut to code, solid, and inspection-ready, sized to the spans and loads of each Oshawa build and set to the engineered plan.
Yes, Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each Oshawa build ready for the framing inspection.
Framing services across Oshawa. See all framing in Oshawa →
Custom homes, additions, renovations, and multiplexes, framed on site for builders, homeowners, contractors, and property teams.
Send your plans, drawings, or a description. Timberr Framing can quote stair framing for Oshawa, framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty, we stand behind every job · Licensed, Insured & WSIB-Covered
Tell us what you need and we’ll get you a quote. 5.0 on Google · Licensed, insured & WSIB-covered · Workmanship warranty · Free, no-obligation quote & site visit.
Timberr Framing provides stair framing, built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing supports plan-based framing for commercial, institutional, property, and builder-led projects across Toronto and Ontario.