Floor and Joist Systems in Barrie frame the floor structure, beams, joists, and subfloor, engineered for span, load, and a flat, quiet floor. Timberr Framing builds it to plan and to the Ontario Building Code in Barrie, licensed, insured, and WSIB-covered across the GTA and the Golden Horseshoe.
Tell us what you need and we’ll get you a quote. 5.0 on Google · Licensed, insured & WSIB-covered · Workmanship warranty · Free, no-obligation quote & site visit.
Timberr Framing did an excellent job with our commercial units! We'll definitely be using them again for future projects!
We have worked with Timberr Framing on a few projects, and they continue to impress with their great workmanship and reliable service in our commercial unit. We highly recommend them for all your metal stud framing needs!
Highly recommend to anyone with a stacked townhome project! Outstanding craftsmanship once again Timberr Framing.
I was impressed by Timberr Framing’s skilled craftsmanship during our commercial framing project. They delivered high-quality work and maintained strong structural integrity in our commercial development that required metal framing.
Timberr Framing’s team was not only punctual and dependable but also demonstrated exceptional skills in both addition and commercial framing projects. We'll definitely hire them again!
Timberr Framing has an efficient process and always completes work on time. Their team is highly organized, and our team of developers are always satisfied with the final results.
I-joists and dimensional joists have to land on the right bearing lines with clean spacing for openings, plumbing, and mechanical runs. Timberr lays out the system before installation so later trades are not cutting structure to make room.
LVL drops, flush beams, steel pockets, joist hangers, and rim board details need exact elevations. We frame those connections so the floor plane stays level and the load path is clear from above to below.
Stairs, ducts, chases, fireplaces, and plumbing stacks interrupt the floor system. Timberr frames headers, trimmers, and doubled joists to the plan instead of leaving unsupported or oversized holes.
A clean floor deck depends on adhesive, fastening pattern, panel staggering, and blocked edges where required. We install subfloor so wall layout starts on a flat platform and squeak-prone shortcuts are avoided.
Floor and joist system framing builds the horizontal structure that carries live loads, walls, stairs, mechanical openings, and finishes through dimensional lumber, I-joists, LVL beams, rim board, hangers, blocking, and subfloor. Timberr Framing lays out the floor from the engineered drawings, coordinates openings and bearing with the GC and trades, and installs a straight, stiff platform ready for walls, inspection, and the next construction stage.
Floor systems decide how a building feels underfoot for decades, so Timberr Framing runs joist layout to the engineered span tables rather than spacing by habit, sizing beams and hangers to the actual load path instead of the nearest available lumber. Openings for stairs, mechanical chases, and skylights get framed without weakening the surrounding structure.
Quotes shift with span, joist spacing and depth, and how many openings interrupt the floor plane. Timberr keeps the subfloor tight and squeak-free by controlling panel layout and fastening schedule, and coordinates with the structural engineer on hanger and connector specs so the finished floor system holds its span for the life of the building.
Timberr Framing schedules floor system installation around the GC's overall shell sequence, coordinating with the structural engineer on hanger and connector details so the floor is ready for the wall framing that follows without delay.
Timberr frames floor and joist systems throughout Barrie, where a mix of custom homes, additions, renovations, and growing residential and light-commercial work. We frame to your architectural and engineered drawings and the Ontario Building Code, coordinating with your engineer, architect, and GC, and leave every structure plumb, square, and inspection-ready.
Every Barrie job is staged so the trades behind us aren't waiting. Licensed, insured, and WSIB-covered, $5M liability.
Clean framing, tight sequencing, and a tidy site, coordinated with concrete, drainage, openings, and surrounding trades, and completed to code where site work is in scope.
Floor and Joist Systems frame the floor structure, beams, joists, and subfloor, engineered for span, load, and a flat, quiet floor. For Barrie projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes, we serve Barrie and the surrounding area. Timing depends on project scope, plans, site access, and inspection scheduling.
Across Barrie, the work concentrates around production and custom-home builders, each job scoped to its own conditions.
Mostly the south end, Ardagh, Painswick, and the lakeshore, Timberr Framing frames for builders, general contractors, and homeowners across Barrie.
In Barrie, the work accounts for production and custom-home builders, so scope of work is matched to the site.
Sized for span and live/dead loads, and in Barrie, spec'd to the load and environment on site.
Timberr Framing serves Barrie and the surrounding area, including production and custom-home builders, with framing scheduled around plans, site access, and inspection timing.
All of Barrie, production and custom-home builders.
Yes, Timberr Framing serves the south end, Ardagh, Painswick, and the lakeshore across Barrie, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope, Timberr Framing reviews the plans for each Barrie project and provides a clear, documented quote.
Yes, Timberr Framing assesses Barrie floor and joist systems on site and provides a documented scope before any work begins.
A 5-star Google rating, local knowledge of Barrie, production and custom-home builders, licensed, insured, fully WSIB-covered work, and full documentation on every build.
Every build is backed: a workmanship warranty. Timberr Framing is licensed, insured, and fully WSIB-covered across Barrie.
Engineered I-joists, LVL beams, and rim board, glued, fastened, and squeak-free, sized to the spans and loads of each Barrie build and set to the engineered plan.
Yes, Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each Barrie build ready for the framing inspection.
Framing services across Barrie. See all framing in Barrie →
Custom homes, additions, renovations, and multiplexes, framed on site for builders, homeowners, contractors, and property teams.
Send your plans, drawings, or a description. Timberr Framing can quote floor and joist systems for Barrie, framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty, we stand behind every job · Licensed, Insured & WSIB-Covered
Tell us what you need and we’ll get you a quote. 5.0 on Google · Licensed, insured & WSIB-covered · Workmanship warranty · Free, no-obligation quote & site visit.
Timberr Framing provides floor and joist systems, built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing supports plan-based framing for commercial, institutional, property, and builder-led projects across Toronto and Ontario.
Tim Hortons 
Subway 
University of Toronto 
Madison Group 
RioCan 
Women's College Hospital 
Starbucks 
Mazda 
TD Bank 
City of Toronto 
Popeyes Tim Hortons Subway University of Toronto Madison Group RioCan Women's College Hospital Starbucks Mazda TD Bank City of Toronto Popeyes 
